3d-modell zitruspresse
3D Printable Files & 3D Models

Housewives and Housekeepers Watch Out!

18 Really Practical Kitchen Gadgets from the 3D Printer

Thanks to 3D printing, you can easily make many kitchen aids yourself. Some makers even develop their own creations that make cooking, baking and rinsing easier. Here is a selection of practical helpers for your kitchen!


One tip in advance: Please use food-safe filaments when printing, as the printed product comes into contact with food!



Pizza Cutter

3d-modell pizza cutter

Source: Thingiverse, NikodemBartnik

Why buy a pizza wheel when you can print it in your favourite colour! The cutting edge of this cutter was printed with PETG, the handle with PLA.

Found on Thingiverse, Maker: NikodemBartnik

To the model


Sugar Dispenser

3d-modell zuckerspender

Source: 3DExport, Alex3dPrintman

This is a practical sugar dispenser for on the go, but it also facilitates dosing, for example of teaspoon units, when cooking and baking at home. Besides the common STL file format, Maker Alex3dPrintman also provides other formats like.c4d or.3ds.

Found on 3DExport, maker: Alex3dPrintman. Price: $10

To the model


Spoon Bowl

3d-modell loeffelschale

Source: Pinshape, barb_3dprintny

Who does not know it, the annoying spoonpuff when cooking. Where to put a spoon full of sauce? Well, in the specially printed drip pan! This one is heat resistant and dishwasher safe.

Found on Pinshape, Maker: barb_3dprintny

To the model


Drainer

3d-modell abtropfbehaelter

Source: Thingiverse, aleiovanevcp

Drainage containers do not always have to be functional, but can also take on cooler shapes. Like this cute elephant, for example, where you can put your freshly washed cutlery to drain and watch the water run through its trunk into the sink.

Found on Thingiverse, Maker: aleiovanevcp

To the model


Sink Scrubber

3d-modell spuelschrubber

Source: MyMiniFactory, JakeJake

To work professionally in the kitchen, you also need clean work surfaces. Since sponges are known to store a bunch of bacteria, it makes sense to think about printing your own sponges. In any case, this one is super hygienic, durable, therefore also environmentally friendly, and of course also removes the dirt in your kitchen.

Found on MyMiniFactory, Maker: JakeJake

To the model


Toast Extractor

3d-modell toastzange

Source: Thingiverse, muzz64

Who doesn’t know that? The fresh toast jumps (if it runs well) warm out of the toaster slot and you can’t wait to spread it. But experience has shown that it is quite hot at first and one almost burns one’s fingers. With these toast tongs this misery has now come to an end!

Found on Thingiverse, Maker: muzz64

To the model


Nutcracker

3d-modell nussknacker

Source: Thingiverse, gianpaolo

Isn’t this nutcracker from PLA stylish? It can be printed with only one.stl file.

Found on Thingiverse, Maker: gianpaolo

To the model


ForkChops

3d-modell chork

Source: Thingiverse, itsallwong

Chork stands for chopstick and fork. If your guests can’t decide whether to eat with chopsticks or forks, just give them a choir. Then you can choose the fork variant, or break off the upper part to use the sticks.

Found on Thingiverse, Maker: itsallwong

To the model


Cherry Stoner

3d-modell kirschenentkerner

Source: Thingiverse, Tunell

Any plans for a cherry pie? Here is the right solution to remove the cores effortlessly!

Found on Thingiverse, Maker: Tunell

To the model


Ravioli Maker

3d-modell ravioli maker

Source: Thingiverse, MEH4d

Mmmh, we all love pasta! And now you don’t just want to buy noodles in the supermarket again, you also want to make your own noodles, because with this ravioli form it’s child’s play! The form measures 15 x 15 x 0.8 cm and your self-created ravioli approx. 4 x 4 x 0.5 cm.

Found on Thingiverse, Maker: MEH4d

To the model


Egg Slicer

3d-modell eierschneider

Source: Thingiverse, miiiiiike

Sometimes you have to be able to improvise and be flexible when printing in 3D: Guitar strings were used for this egg slicer!

Found on Thingiverse, Maker: miiiiiike

To the model


Egg Separator

3d-modell eitrenner

Source: Thingiverse, Fastrack

This egg separator in funny retro design works quite well: You break the egg at the edge of the cup and then carefully let the egg white run out of the mouth-shaped slot.

Found on Thingiverse, Maker: Fastrack

To the model


Domo Bottle Opener

3d-modell domo

Source: Thingiverse, tachyio

Aren’t they cute these little colored bottle openers? At least in Japan, the mascot named “Domo” is popular. -Maybe you’ll be in your kitchen soon!

Found on Thingiverse, Maker tachyio

To the model


Citrus Juicer

3d-modell zitruspresse

Source: Thingiverse, walter

Now colour comes into your kitchen and juice squeezing is twice as much fun! This bright yellow kitchen gadget was printed with Up! yellow ABS.

Found on Thingiverse, Maker: walter

To the model


Funnel

3d-modell trichter

Source: Thingiverse, jckray

This funnel was created in a LulzBot Mini with dark green ColorFabb XT. Depending on requirements, the kitchen help can be printed in various sizes. You only have to modify the model in a slicer program.

Found on Thingiverse, Maker: jckray

To the model


Measuring Cups

3d-modell messbecher

Source: Thingiverse, OogiMe

This cool five-piece measuring cup set consists of 1, 3/4, 1/2 .1/3 and 1/4 units.

Found on Thingiverse, Maker: OogiMe

To the model


Measuring Spoon

3d-modell messloeffel

Source: Thingiverse, wstein

Also “Spoon units” can be measured exactly with this colorful variant from now on. Depending on taste, they can be printed as a simple spoon or with two ends.

Found on Thingiverse, Maker: wstein

To the model


Wall Panel

3d-modell wandpanel

Source: Thingiverse, MinnesotaMade

But what would cooking be without order? -This tray printed in a MakerBot Replicator helps you to put things in order and it looks really stylish! Whether cooking spoon, tea towel or a fresh herb bundle. -Everything finds its place.

Found on Thingiverse, Maker: MinnesotaMade

To the model


More 3D models to print


Also interesting...