For all big Amy Winehouse fans this completely 3D printable set is a must! It consists of a movable Amy-figure by maker “Evavooo” and a guitar and a microphone by maker “Megan Brown” including stand. You will be amazed how detailed and ingenious the result of this project is!
The figure consists of three parts: The head was printed with 0.1 mm layer height and 10 % infill within 3.5 hours including support with 18 g filament. The upper and lower body were printed with a layer height of 0.2 mm each and 10 % infill without support of 68 grams in 7 hours. For the dress Maker “Evavooo” recommends flexible filament, such as Ninjaflex or Filaflex.
The 3D model of the acoustic guitar is also rich in detail: the inscription “RIP 1983 – 2011” in tattoo style can be found on the back and to make it quite authentic, you can also print the guitar strap with flexible filament. Both parts can be printed without support.
The microphone including stand was printed within 51 minutes with 6 grams of filament without support. A drop of glue at the end gives the stand the necessary hold.
Once you have printed the individual parts, your creativity is needed! Go crazy artistically and give Amy the finishing touch with a little color!