For all restless minds and hyperactive: Fidget spinners are the ultimate solution! Here is a selection of 3D models to print at home:
What a about a flower shape? “adafruit” explains in the following video how to make the spinner step by step:
Found on Thingiverse, Maker: adafruit
With this motorcycle fidegt spinner you can do crazy tricks and also print cool accessories like a motorcycle helmet or various centerpieces and personalize the threaded bearing cap.
Found on Pinshape, Maker: riskable
This cool triangle, which does without ball bearings, can be printed in one piece. It is ready to use immediately after printing and if you give a little silicone between the bearings, it rotates even better!
Found on MyMiniFactory, Maker: Muzz64
This fidget spinner is special, because when you make it spin, it presents itself in all the colors of the rainbow. Best of all, the light lasts up to 80 hours with normal batteries and you don’t need an on/off switch! An ideal companion for nocturnal and party-goers!
Found on Thingiverse, Maker: vorpal
Depending on your taste you can choose a star with optional 4, 5 or 6 balls or nuts. Then download, print, build and turn on it!
Found on Cults, Maker: LUCINA
How about this cool-designed bronze-colored steampunk fidget spinner? Maker “PlacidCat” chose nuts that are more expensive than coins but cheaper than ball bearings. They also give the spinner the necessary balance. It was printed with a BobsCNC RP9 v2 kit and the chic cyan middle part was added by a “happy mishap”.
Found on Thingiverse, Maker: PlacidCat
Maybe you can find peace of mind with this “om” fidget spinner! For this version Maker “brockmeieradam” chose PLA with 100% infill, then it was printed with a Printrbot Play. You will find detailed information of this design and an instruction how to print that gadget without complications.
Found on Thingiverse, Maker: brockmeieradam
For all soccer fans, of course, this one is a must have!
Found on Pinshape, Maker: 3DFazz
Well, is there soon a Pokémon jumping out of it? For this fidget spinner you need: A 3D printer, filament, three M8 nuts, superglue and a 608 ball bearing.
Found on Thingiverse, Maker: DanielJosvai
If you have TPU for printing at home, Maker “Brentox” strongly recommends to use it, because you will get a wonderful result. In any case, it should be a flexible printing material so that the fidget spinner rotates perfectly in your hand. This one was printed on an Anet A6.
Found on Thingiverse, Maker: Brentox
This spinner is suitable for particularly large hands. It is heavier than many others, but it spins for a longer duration. With Maker “Jason3030” even 4 minutes! He printed it with a Prusa Mk2.
Found on Thingiverse, Maker: Jason3030
This is a spinner with notches on the inside for better grip. It was printed with an Ultimaker 2.
Found on Thingiverse, Maker: Cema_92
These little shovels can also be moved with wind or your puff. The spinner was printed in windmill design with a Wanhao Duplicator i3 V2.
Found on Thingiverse, Maker: Oldhurbert
Small and compact – ideal for your pocket, children’s or delicate hands! The single spinner was printed with White Hatchbox PLA.
Found on Thingiverse, Maker: TimBolton
This spinner was printed with a ZONESTAR Prusa i3. To give the skulls a little weight and shine, “MrWai” chose BrassFill filament.
Found on Thingiverse, Maker: MrWai
Here’s a fidget spinner upgraded with balls!
Found on Thingiverse, Maker: Cema_92
This fidget spinner was printed with a Wanhao Duplicator i3 V2 and is definitely a gadget for true ninja lovers. The Japanese character on the centerpiece even means “Ninja”. But be aware: It is not meant to be thrown!
Found on Thingiverse, Maker: PleaseNoFisticuffs
These cute pink kittens are especially suitable for smaller hands.
Found on Thingiverse, Maker: Lucina
What about this cool Batman design? It was printed with ABS in a QIDI Tech I.
Found on Thingiverse, Maker: Brizzle
For purist makers. The same design can also be printed as a duo spinner.
Found on Thingiverse, Maker: WKC
If you want to use your brains a little bit during the game, it’s best to print these ABS math spinners without support.
Found on Thingiverse, Maker: pauloblank
Smileys with Yo-Yo Effect
Paying with such a cheerful-orange smiley gadget which spins like a yoyo makes fun!
Found on Pinshape, Maker: DJER
Spoilt for Choice
Looks almost like a flower meadow! Spinners in all shapes and colors from a Flash Forge Creator Pro. Which one do you like the most?
Found on Thingiverse, Maker: B-O-T